Creating Healthier Indoor Air Quality

AeroFresh 180

Heat Recovery Unit


The Aerofresh 180 heat recovery system provides maximum comfort and healthier living spaces in buildings with high ventilation requirements. It uses a high efficiency counter-flow heat exchanger that can recover up to 82% of heat.

Centralised Heat Recovery for Restricted Spaces


The Aerofresh 180 is a compact, energy efficient heat recovery ventilation system that is well suited to horizontal ceiling or false-ceiling mounted installations.

Aerofresh provides a healthier, well ventilated indoor space with simple and quiet operation. It recovers thermal energy from the exhausted air of wet rooms such as kitchens and bathrooms that would otherwise be expended. This heat is then transferred to the fresh, filtered supply air drawn in from outside.

It is achieved by using a highly efficient counter-flow heat exchanger which recovers up to 82 % of heat.


Ventilation System Example

New build.

A continuously operating Aerofresh 180 heat recovery unit transfers heat from humid air extracted from wet rooms to warm incoming fresh air during winter which is ducted to habitable rooms. In summer the reverse process occurs with cooler indoor air being extracted, cooling the incoming fresh air.

Thanks to the easy-to-fit air distribution system, each room can be ventilated to achieve excellent indoor air quality.The boost function enables rapid extract of increased moisture or pollutant levels. It also provides discrete installation and quite operation.

The preheated/precooled fresh air and continuous air changes reduce the demand for additional heating/air-conditioning.

The EC brushless motors significantly reduce the energy consumption.

A correctly specified mechanical ventilation system can ensure the quality of the indoor air is constantly maintained for the health and well-being of the occupants as well as of the building.Duly maintained filters ensure that incoming air is suitably filtered of dust and pollen before if enters the home

 

Aerofresh 180 Controller


Multi-function remote control panel with LCD display, supplied as standard with the Aerofresh 180.

  • Suitable for surface (wall) mounting
  • Mode of operation display
  • Filter change alarm display
  • Bypass status display
  • Error message display
  • Installer setup functions
  • Well suited to shallow ceiling voids with a maximum height of 269mm
  • Boost function enables rapid extraction of increased moisture or pollutant levels
  • Automatic bypass for free cooling during the summer season
  • Anti - frost protection to prevent frost build - up
  • EC motor for increased energy efficiency and stepless speed control control
  • Long lasting powder coated galvanised sheet steel construction
  • Highly efficient counter flow heat exchanger to maximise thermal recovery of up to 82 % of heat
  • Can be connected to a BMS via Modbus RTU for easy system control and monitoring
  • Complies with European ErP Directive, Regulations 1253 / 2014 – 1254 / 2014(HRV performance standards)
  • Weight: 20kg
  • Ducting: 4 x Ø125mm spigots
  • Condensate connection: 16mm (for tube connection)
  • Construction:
    • Internal body - EPP (Polythlene)
    • Unit housing - Painted Galvanised Steel
  • Voltage: 220-240 V
  • Fan motors: EC
  • Filters: Extract - G4, Supply - G4
  • Operating Speed40% 60% 80% 100%
    Intake24344145
    Supply21303741
    Extract21303741
    Exhaust26344044
    Breakout21293741
           

    * Sound Pressure level @ 3m in free field

    A - Intake air from outside
    B - Exhaust air to outside
    C - Supply air to inside
    D - Extract air from inside
    E - Winter condensation drainage
    F - Summer condensation drainage

    AeroFresh 180

    Heat Recovery Unit

    About Us

    Fantech, the industry leader for over 45 years and continues to be the forefront of fan and acoustics technology by developing and implementing new and innovative products for virtually every air movement and ventilation need.

    Useful Links